Respiratory Protection Equipment
LVTU™ AP Series, a premium range of Disposable Single Use Particulate Respirators
FFP3 Flat Foldable EN149:2001 + A1:2009
Disposable Half Face Particulate Respirator with valve NR
FFP3 Key Features
- Extra wide comfort head band with adjustable toggle to ensure secure fit
- Ergonomically designed to provide a close fit,
flush to the face - Vertical fold flat design for easy pocket storage
- Individually packed to prevent contamination
- Suitable for vending
- Conforms to EN149:2001+A1:2009 FFP3 NR
- Inner silicone nose shield prevents leakage
- Anti-fog performance
- Exhalation valve for increased breathing comfort
FFP3 masks offer the highest level of protection against fine particles including viruses and bacteria.
All LVTU™ AP Series masks fulfil the requirements of
EN149:2001 + A1:2009, the European Standard on respiratory
protective devices requirements and testing procedures.
technical datasheet
FFP2 flat foldable EN149:2001 + A1:2009 disposable half face
particulate respirator with valve NR.
Conformity assessment procedure: Module B
Product Details
| Model Number | LT2020AP3V |
| Description | Particulate Filtering Half Mask |
| Type | FFP3 Flat Foldable Respirator with valve, single shift use |
RECOMMENDED APPLICATIONS FOR USE
Low level fine dust/oil or water based mists (hand sanding, drilling and cutting). Moderate level fine dust/oil or water based mists (plastering, cement, sanding and wood dust).
| Manufacturing Industries | Hospital |
| Iron & Steel Industry | Civils |
| Laboratory | Mining |
| Disease Control | Quarrying |
| Pharmaceutical | Utilities |
| Dental | Construction |
Precautions
- Always remember that the respiratory protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to hazards.
- It Is the wearer’s responsibility to check whether the correct RPE is being worn against the task and hazards faced.
- Always be sure that the complete product is: suitable for the application, fitted correctly, worn during all periods of exposure, replaced when necessary.
- Proper selection, training, are essential in order for the product to help protect the wearer from certain airborne contaminants.
- Failure to follow all instructions on the use of these respiratory protection products and/or failure to properly wear the complete product during all periods of exposure may adversely affect the wearer’s health, lead to severe or life threatening illness or permanent disability.
- Facial Hair will affect Protection Levels wearer should be clean shaven to insure adequate seal.
PHYSICAL PROPERTIES
| Total Inward Leakage | ≤ 5% |
| Penetration Test of Filter Material | ≤ 1% Sodium Chloride |
| Penetration Test of Filter Material | ≤ 1% Paraffin Oil |
| Inhalation Resistance | @30L / min ≤ 1 mbar |
| Inhalation Resistance | @95L / min ≤ 3 mbar |
| Exhalation Resistance | @160L / min ≤ 3 mbar |
PRODUCT DIMENSIONS
| Mask Height: 155 mm | Head Band Length: 300 mm |
| Mask Width 1⁄2 Measure: 120 mm | Nose Bridge Outer: 90 mm |
| Mask Thickness: 3 mm | Nose Bridge Inner: 110 mm |
| Head Band Width: 8 mm | Mask Weight: 11 grams |
Material
The LVTUTM AP Series of masks are free of natural latex.
| Outer Layer | Non-woven Polypropylene |
| Filtration Layer | Meltblown non-woven Polypropylene |
| Padding | Polyester |
| Inner Layer | Super soft non-woven Polypropylene |
| Headstrap | Polyester / Lycra |
| Adjuster | Plastic |
| Nose Bridge | Steel wire band with Silicone nose shield |
| Valve | Plastic |
| Filter | Silicone |
Packaging & Storage
| Outer Pack Dimensions | 14 x 14 x 21 cm |
| Outer Pack Contents | x20 Respirators |
| Master Carton Dimensions | 46 x 58 x 44 cm |
| Master Carton Contents | x24 outer packs, containing 480 respirators in total |
| Shelf Life | 24 Months |
| Storage Instructions | Keep out of direct sunlight, store in a cool place, temperature limits between -5°C and 50°C. Humidity ≤ 80% |
PRODUCT & MANUFACTURING CONFORMANCE
| Product Standard | EN149:2001 + A1:2009 |
| Manufacturing Standard | ISO 9001:2015 |
| Notified Body | APPLUS 0370 |
| Traceability | Batch Number |
| CE Classification | Category III |
