Respiratory Protection Equipment
LVTU™ AP Series, a premium range of Disposable Single Use Particulate Respirators
FFP3 Flat Foldable EN149:2001 + A1:2009
Disposable Half Face Particulate Respirator NR
FFP3 Key Features
- Extra wide comfort head band with adjustable toggle to ensure secure fit
- Ergonomically designed to provide a close fit,
flush to the face - Vertical fold flat design for easy pocket storage
- Individually packed to prevent contamination
- Suitable for vending
- Conforms to EN149:2001+A1:2009 FFP3 NR
- Inner silicone nose shield prevents leakage
- Anti-fog performance
FFP3 masks offer the highest level of protection against fine particles including viruses and bacteria.
All LVTU™ AP Series masks fulfil the requirements of
EN149:2001 + A1:2009, the European Standard on respiratory
protective devices requirements and testing procedures.
technical datasheet
FFP2 flat foldable EN149:2001 + A1:2009 disposable half face
particulate respirator NR.
Conformity assessment procedure: Module B
Product Details
| Model Number | LT2020AP3 |
| Description | Particulate Filtering Half Mask |
| Type | FFP3 Flat Foldable Respirator without valve, single shift use |
RECOMMENDED APPLICATIONS FOR USE
Higher level fine dust/oil or water based mists (hazardous powders, biological agents and fibres) Fine dust/oil or water based mists. Options for metal fume, ozone and nuisance levels of certain gases and vapours dependent on model. All masks should be fit tested by an Accredited Tester.
| Manufacturing Industries | Hospital |
| Iron & Steel Industry | Civils |
| Laboratory | Mining |
| Disease Control | Quarrying |
| Pharmaceutical | Utilities |
| Dental | Construction |
Precautions
- Always remember that the respiratory protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to hazards.
- It Is the wearer’s responsibility to check whether the correct RPE is being worn against the task and hazards faced.
- Always be sure that the complete product is: suitable for the application, fitted correctly, worn during all periods of exposure, replaced when necessary.
- Proper selection, training, are essential in order for the product to help protect the wearer from certain airborne contaminants.
- Failure to follow all instructions on the use of these respiratory protection products and/or failure to properly wear the complete product during all periods of exposure may adversely affect the wearer’s health, lead to severe or life threatening illness or permanent disability.
- Facial Hair will affect Protection Levels wearer should be clean shaven to insure adequate seal.
PHYSICAL PROPERTIES
| Total Inward Leakage | ≤ 5% |
| Penetration Test of Filter Material | ≤ 1% Sodium Chloride |
| Penetration Test of Filter Material | ≤ 1% Paraffin Oil |
| Inhalation Resistance | @30L / min ≤ 1 mbar |
| Inhalation Resistance | @95L / min ≤ 3 mbar |
| Exhalation Resistance | @160L / min ≤ 3 mbar |
PRODUCT DIMENSIONS
| Mask Height: 155 mm | Head Band Length: 300 mm |
| Mask Width 1⁄2 Measure: 120 mm | Nose Bridge Outer: 90 mm |
| Mask Thickness: 3 mm | Nose Bridge Inner: 110 mm |
| Head Band Width: 8 mm | Mask Weight: 11 grams |
Material
The LVTUTM AP Series of masks are free of natural latex.
| Outer Layer | Non-woven Polypropylene |
| Filtration Layer | Meltblown non-woven Polypropylene |
| Padding | Polyester |
| Inner Layer | Super soft non-woven Polypropylene |
| Headstrap | Polyester / Lycra |
| Adjuster | Plastic |
| Nose Bridge | Steel wire band with Silicone nose shield |
Packaging & Storage
| Outer Pack Dimensions | 14 x 14 x 21 cm |
| Outer Pack Contents | x25 Respirators |
| Master Carton Dimensions | 46 x 58 x 44 cm |
| Master Carton Contents | x24 outer packs, containing 600 respirators in total |
| Shelf Life | 24 Months |
| Storage Instructions | Keep out of direct sunlight, store in a cool place, temperature limits between -5°C and 50°C. Humidity ≤ 80% |
PRODUCT & MANUFACTURING CONFORMANCE
| Product Standard | EN149:2001 + A1:2009 |
| Manufacturing Standard | ISO 9001:2015 |
| Notified Body | APPLUS 0370 |
| Traceability | Batch Number |
| CE Classification | Category III |
